If you’ve ever stood in front of a shelf full of cleaning chemicals trying to figure out what you actually need, you’re not alone. Truck wash, degreaser, traffic film remover, chassis cleaner. The labels all sound different but there’s a lot of overlap, and most people end up buying more products than they need.
We get asked this question all the time at A Cleaners Dream, so here’s the honest answer.
What a Truck Wash Actually Does
A truck wash is designed to clean the exterior surfaces of a vehicle. It targets the everyday stuff that builds up on the road. Dust, dirt, mud, traffic film, bugs, and light road grime.
A decent truck wash concentrate is formulated to be safe on paint, cab finishes, glass, and chrome. It lifts the surface contamination without stripping your clear coat or any protective coatings you’ve got on there.
Think of it like a car shampoo but significantly stronger, because a truck picks up a lot more filth than a Camry doing school runs.
What a Degreaser Does
A degreaser is a different animal. It’s specifically made to break down oil, grease, hydraulic fluid, diesel soot, and other petroleum based contamination.
The areas on a truck that usually need degreasing are the chassis rails, the engine bay, wheel hubs, fifth wheel couplings, and around fuel tanks and hydraulic lines. Basically anywhere that oil or grease ends up.
Degreasers tend to be more aggressive than a standard truck wash because they have to be. Grease doesn’t respond to the same stuff that lifts road dust. Some are solvent based, others are alkaline or caustic. The downside is that the stronger ones can damage paint, rubber seals, and aluminium if you’re not careful.
The Problem With Buying Both
Most fleet operators and owner drivers end up buying a truck wash and a degreaser separately. That means two products, two drums, and a two step washing process. Wash the body first, then switch products and go over the chassis and engine bay.
On one truck that’s fine. Across a fleet of ten or twenty trucks it adds up fast. More products to buy, more stock to store, more time spent on each wash.
There’s also the risk of grabbing the wrong bottle. Spray a heavy caustic degreaser on a painted cab and you’ll strip the clear coat. Use a mild truck wash on a greasy chassis and you’ll be scrubbing all day with nothing to show for it.
So Do You Need Both?
For most people, no. Not if you pick the right product.
A well made 2 in 1 truck wash and degreaser combines the surface cleaning power of a truck wash with the grease cutting ability of a degreaser in one formula. You adjust the dilution ratio depending on the job. Lighter mix for a regular body wash, stronger mix for chassis and engine work.
The key is that it has to actually be well formulated. A bad 2 in 1 is just a weak truck wash with a bit of solvent chucked in. A good one is properly engineered to do both jobs. Strong enough to break down chassis grease but safe enough to use on paint without doing damage.
When You Might Still Want a Separate Degreaser
If you’re dealing with an engine bay that hasn’t been touched in years and the grease is centimetres thick, a 2 in 1 might need a hand. Same goes for workshop floors, parts washing, or equipment that’s absolutely caked in hydraulic oil. Some jobs just need a dedicated heavy duty degreaser for that first clean.
For those situations we recommend our Liquachem Degreaser. It’s built for the really stubborn stuff that needs extra cutting power. Use it for the initial heavy clean, then switch to Blue Power 2 in 1 for your regular maintenance washes going forward. That way you get the deep clean when you need it and the convenience of a 2 in 1 for the week to week upkeep.
What We Recommend
We built Blue Power 2 in 1 specifically because we were sick of telling customers they needed to buy two products when one should do the job.
It’s a concentrated truck wash and degreaser that handles both in a single pass. Use it lighter at around 1:50 for a regular body wash, or mix it stronger at 1:10 for heavy degreasing. One drum, one product, every job covered.
It’s safe on painted surfaces, cabs, glass, and chrome, so you don’t need to stress about switching products between the body and the chassis. And because it’s concentrated, a 20L drum goes a seriously long way.
If you’re currently buying a truck wash and a degreaser separately, do the maths. You’ll probably find that switching to a single 2 in 1 saves you money and time.
Want to try it? Blue Power 2 in 1 is available in 5L and 20L from our online store, with delivery across Sydney & Australia wide.