Blue Punch 2 in 1 Truck Wash and Degreaser: Everything You Need to Know

Blue Punch 2 in 1 is our Australian made concentrated truck wash and degreaser built for fleet operators, owner drivers, transport companies, and workshops. One product that handles the wash and the degrease in a single pass. No need to buy two separate chemicals.

Here’s everything you need to know about using it, diluting it, and getting the best results out of it.

What It Does

Blue Punch 2 in 1 is a high alkaline cleaning concentrate that removes road grime, traffic film, diesel soot, chassis grease, brake dust, hydraulic oil residue, and insect build up all in a single application. It works as a surface wash for painted panels, cabs, trailers and curtains, and as a degreaser for chassis, engine bays, machinery, and workshop surfaces.

The 2 in 1 name isn’t just marketing. The formula combines strong degreasing performance with rich foaming detergency. The foam clings to the surface and lifts contaminants fast, which means less scrubbing and a better result. And it’s got a fresh citrus fragrance which is a bonus when you’re using it all day.

Safe on Paint and Surfaces

One of the biggest concerns with any truck cleaning product is whether it’s going to damage your paint. Aggressive degreasers will strip clear coats, dull paint, and wreck rubber seals over time. We’ve seen it happen plenty of times.

Blue Punch 2 in 1 can be used on compatible painted surfaces when diluted correctly and used as directed. Don’t apply it to hot surfaces, don’t let it dry on, and if you’re using it on something new, always test a small hidden area first. That said, our customers use it on cabs, trailers, chrome, glass, and chassis every week without issues.

Dilution Ratios

Blue Punch 2 in 1 is a concentrate so you control the strength by adjusting the mix. Here’s what we recommend.

For light vehicle washing and regular maintenance where the truck’s only been out for a few days, dilute it at 1:80 to 1:100. That’s all you need to lift dust and light road film.

For standard truck washing, trailers, curtains, and general fleet washing, dilute it between 1:40 and 1:60. This is your everyday ratio and where most of our customers sit.

For general degreasing on machinery, workshop areas, and moderately greasy components, go stronger at around 1:20 to 1:40.

And for heavy grease, engines and chassis, mix it at 1:10 to 1:20. That’s full strength territory and it’ll cut through pretty much anything.

Apply it with a spray, brush, foam system, or through your pressure washer. Let it sit for one to three minutes depending on the soil level so it has time to break everything down, then rinse off thoroughly with clean water. Don’t let it dry on the surface.

One 20L drum at a 1:60 dilution gives you 1,200 litres of wash solution. That’s a lot of trucks from a single drum.

How to Use It

The process is the same as any standard commercial truck wash.

Pre rinse the whole truck with a pressure washer to knock off the loose dirt. Apply Blue Punch 2 in 1 through a foam cannon, foam system, spray applicator, or by manual washing with a brush. Let it sit for one to three minutes so the formula has time to work. Agitate with a soft bristle brush on painted surfaces or a stiffer brush on chassis and mechanical components. Then rinse the whole thing off thoroughly from top to bottom.

If you’re washing multiple trucks, you can run it through a dosing system or proportioner for consistent dilution across every wash.

Available Sizes

We sell Blue Punch 2 in 1 in multiple sizes to suit different operations.

The 5L drum is good for single truck operators, workshops, or anyone who wants to try the product before committing to a bigger quantity. It’s also handy for mobile detailers or anyone tight on storage space.

The 20L drum is the standard for fleet operations and regular commercial use. It’s the most popular size with our customers and the best value per litre.

For larger operations we also supply 200L drums and 1000L IBC containers. If you need those quantities, get in touch and we’ll sort out pricing and delivery.

Who Uses It

We supply Blue Punch 2 in 1 to transport companies, truck wash businesses, fleet maintenance operators, owner drivers, construction and mining operations, mobile truck wash businesses, workshops, machinery yards, and industrial cleaning teams across Sydney and Australia wide.

If you’re currently buying a truck wash and a degreaser as separate products, Blue Punch 2 in 1 replaces both.

Complete the Detail

If you want your trucks looking their best after the wash, pair Blue Punch with the rest of our Liquichem Autoclean range. Silicone Tyre Shine for the tyres, Chrome and Glass Cleaner for the windows and mirrors, and Dash and Trim Restorer for the cab interior. And if you need a standalone degreaser for really heavy jobs, our Liquichem Heavy Duty Multipurpose Degreaser handles the worst of it.

Where to Buy

Blue Punch 2 in 1 is available direct from us at A Cleaners Dream Supplies. We’re based in Wetherill Park, Sydney. Orders over $250 qualify for free Sydney Metro and Central Coast delivery, and we ship Australia wide.

For bulk quantities, trade pricing, or a regular supply arrangement, give us a call on (02) 9607 4487 or send us a message and we’ll sort something out.

Ready to give it a go? Grab the 5L to test it, or go straight to the 20L for the best value.

shipping Check Delivery
Scroll to Top