Picking a truck wash sounds like it should be straightforward, but once you start looking at the options it can get confusing fast.
Alkaline, pH neutral, caustic, biodegradable, concentrated, ready to use — the terminology alone is enough to make you grab whatever is cheapest and move on.
But choosing the right truck wash matters. The wrong product can cost you more money, damage surfaces over time, or simply not clean properly.
We’ve been supplying cleaning chemicals to fleet operators, owner drivers, workshops and industrial users for a while now, and the same questions come up over and over. Here’s what we tell people to actually look for.
1. Concentration and Dilution Ratio
This is one of the biggest things that determines your real cost, and most people ignore it completely.
Say you have two 20L drums on the shelf. One dilutes at 1:60 and gives you around 1,200 litres of wash solution. The other dilutes at 1:10 and gives you around 200 litres. Same size drum, but a massive difference in how far it goes.
Always work out the cost per wash, not just the cost per drum.
A more expensive concentrate that dilutes further can often work out cheaper per wash than a budget product you have to use much stronger.
Even better if the product gives you flexible dilution ratios. That way you can run it lighter for regular maintenance washing or stronger for heavier grime and degreasing.
One product, multiple jobs.
For example, Liquichem Blue Punch 2 in 1 Truck Wash & Degreaser can be used at lighter dilutions for general vehicle washing, or stronger for dirty trucks, engines, chassis, machinery and workshop cleaning.
5L option:
Blue Punch 2 in 1 5L
20L option:
Blue Punch 2 in 1 20L
2. pH Neutral vs Alkaline Truck Wash
This is where a lot of people get confused.
A pH neutral wash is generally the safest option for regular washing, especially on painted surfaces, coated vehicles, waxes, ceramic coatings and more delicate finishes. It is a good choice when the truck is not heavily soiled and you want something gentle for frequent washing.
An alkaline truck wash gives you more cleaning power. It is better for road grime, diesel soot, bugs, grease, traffic film, workshop dirt and heavier contamination.
Most commercial truck washes sit in this category because trucks usually need more cleaning strength than a standard car wash.
The key is choosing the right alkaline product. You want strong cleaning performance without using something overly aggressive for the job.
If the fleet is washed often and mainly deals with light road film, a pH neutral wash may be enough.
If the trucks come back covered in grease, soot, mud, dust or heavy traffic film, you’ll usually need an alkaline truck wash or a 2 in 1 truck wash and degreaser.
3. Paint and Surface Safety
This one is non-negotiable.
Whatever you use needs to be suitable for the surfaces it touches. Paint, clear coat, aluminium, stainless steel, rubber seals, glass and chrome can all react differently depending on the chemical being used.
A product that cleans fast but slowly dulls paint, stains aluminium or dries out trims is not saving you money.
We’ve seen trucks where aggressive caustic cleaners have been used for months and the cab paint looks years older than it should. It gets the truck clean quickly, but over time it can damage the finish.
For regular fleet washing, stick with products designed for vehicle surfaces.
Heavy caustic degreasers should be kept for the right jobs, like concrete floors, parts cleaning, heavy workshop grime and industrial degreasing.
Also, always follow the directions. Do not apply strong alkaline products to hot surfaces, do not allow them to dry, and test first on sensitive surfaces like polished aluminium.
4. Does It Actually Clean Properly?
Sounds obvious, but a lot of truck wash products barely cut through real-world grime.
A proper truck wash should be able to handle road grime, traffic film, diesel soot, bugs, brake dust and general dirt.
Depending on the operation, it may also need to deal with mud, clay, cement dust, quarry dust, mining residue or workshop grease.
The tricky part is finding something strong enough to clean properly without being so aggressive that it damages surfaces.
This is where 2 in 1 truck wash and degreaser products are useful. Instead of using one product for the body and another for the chassis or engine bay, a good 2 in 1 product can handle both depending on the dilution used.
Foam also matters.
Good foam helps the chemical cling to the surface longer and lift contamination instead of running straight off. For fleet washing, dwell time and coverage make a big difference.
5. Think About What You’re Actually Washing
Not every fleet needs the same product.
A linehaul fleet doing highway kilometres usually deals with traffic film, bugs and diesel soot. A good truck wash or 2 in 1 wash is usually enough.
A construction fleet running in and out of job sites deals with clay, dust, mud, cement residue and heavier contamination. That usually needs more cleaning power.
An urban delivery fleet picks up brake dust, exhaust film and city grime, but may benefit more from frequent lighter washing rather than heavy chemical every time.
A tipper, machinery or workshop fleet may need a stronger wash and a proper degreaser on hand.
Match the chemical to the job.
There is no point paying for heavy industrial strength cleaner if your trucks only need a maintenance wash. At the same time, there is no point using something weak if your trucks come back filthy every afternoon.
6. Buy in Bulk
For fleet operations, buying in bulk makes sense.
A 20L drum is the standard size for many commercial operators and is usually much more cost-effective than buying multiple 5L bottles.
For larger operations, 200L drums or 1000L IBC containers can reduce your cost even further and make regular supply easier.
If one 2 in 1 product can replace both your truck wash and your degreaser for certain jobs, you can also reduce how many chemicals you need to store and reorder.
Less stock to manage, less confusion for staff, and better consistency across the wash process.
7. Use a Local Supplier
Heavy liquid products are expensive to ship, so using a local supplier can make a big difference.
If you’re in Sydney or NSW, having a local supplier means faster delivery, lower freight costs, easier bulk ordering and someone you can actually call if you need advice.
Liquichem is based in Wetherill Park, Sydney, and supplies across Sydney metro and Australia wide.
For fleet operators, workshops and industrial users, we can also help with bulk pricing and regular supply arrangements.
What We’d Suggest
The right product depends on the type of fleet and the level of cleaning required.
For regular vehicle washing where surface safety is the priority, Liquichem pH Neutral Snow Foam Car Wash is a good option. It is ideal for frequent washing, foam cannon use, coated vehicles and maintenance cleaning where you want a gentle wash.
For trucks, fleets, machinery and heavier road grime, Liquichem Blue Punch 2 in 1 Truck Wash & Degreaser is the better all-round option. It is Australian made, concentrated, high foaming and designed to work as both a truck wash and a degreaser depending on the dilution used.
You can view the 5L option here:
Blue Punch 2 in 1 5L
You can view the 20L concentrate option here:
Blue Punch 2 in 1 20L
For larger fleet operators, 200L drums and 1000L IBC options are also available.
For heavy workshop grime, concrete floors, engines, machinery and industrial cleaning, Liquichem Industrial Strength Degreaser is the stronger option. This is the product you would use when you need serious degreasing power, not just a maintenance wash.
And if you want to finish the vehicle properly after washing, the Liquichem range also includes Silicone Tyre Shine, Chrome & Glass Cleaner, and Dash & Trim Restorer.
Even if you don’t go with our products, use the criteria above when comparing options.
A lot of operators waste money buying the cheapest drum on the shelf without checking dilution ratios, surface safety or whether the product is actually suited to their fleet.
Do the maths, match the chemical to the job, and you’ll make a better decision.
Need help choosing the right product for your operation?
Get in touch and we’ll give you honest advice. No sales pitch, just straight answers.
Sydney metro and Australia wide. Bulk pricing and regular supply arrangements available for fleet operators, workshops and industrial users.